Dyno Day @ "Waynes Dyno", J'Ville, N.C.
02-25-2009, 10:29 AM
#1
Administrator
Thread Starter
Dyno Day @ "Waynes Dyno", J'Ville, N.C.
I wanted to let the NCDTR #18 Crew know that there will be at Dyno Day at "Waynes Dyno and Performance", 3789 Highway 258 (Richlands Highway),
Jacksonville, N.C. 28540 on Saturday March 28th, 2009. Doors will open at 10:00 A.M. and the event will last until 4:00 P.M.
Cost for the dyno runs will be the same deals as always.
Two (2) runs $40.00, four (4) runs $60.00.
There will be a sign up list so get there early.
CASH ONLY
---------
John_P
Jacksonville, N.C. 28540 on Saturday March 28th, 2009. Doors will open at 10:00 A.M. and the event will last until 4:00 P.M.
Cost for the dyno runs will be the same deals as always.
Two (2) runs $40.00, four (4) runs $60.00.
There will be a sign up list so get there early.
CASH ONLY
---------
John_P
02-26-2009, 06:24 PM
#5
Registered User
Join Date: Sep 2007
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
I wanted to let the NCDTR #18 Crew know that there will be at Dyno Day at "Waynes Dyno and Performance", 3789 Highway 258 (Richlands Highway),
Jacksonville, N.C. 28540 on Saturday March 28th, 2008. Doors will open at 10:00 A.M. and the event will last until 4:00 P.M.
Cost for the dyno runs will be the same deals as always.
Two (2) runs $40.00, four (4) runs $60.00.
There will be a sign up list so get there early.
CASH ONLY
---------
John_P
Jacksonville, N.C. 28540 on Saturday March 28th, 2008. Doors will open at 10:00 A.M. and the event will last until 4:00 P.M.
Cost for the dyno runs will be the same deals as always.
Two (2) runs $40.00, four (4) runs $60.00.
There will be a sign up list so get there early.
CASH ONLY
---------
John_P
What kind of dyno is it? I might make it.
02-26-2009, 07:23 PM
#7
Administrator
Thread Starter
------------------------------------------------------------------------
Brian:
I would sure like to see you make it down for this Brian and run that "rocketship" of yours on Wayne's Dyno!
BTW,....have you run it on a dyno since you did all of your recent engine work?
--------
John_P
Brian:
I would sure like to see you make it down for this Brian and run that "rocketship" of yours on Wayne's Dyno!
BTW,....have you run it on a dyno since you did all of your recent engine work?--------
John_P
Trending Topics
02-27-2009, 08:03 AM
#10
Administrator
Thread Starter
Dan:
It is Wayne Murphy's (Waynes Dyno Owner) event Dan. He hosts a few of these a year not including our diesel events there.
02-27-2009, 06:30 PM
#13
Registered User
Join Date: Sep 2007
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
------------------------------------------------------------------------
Brian:
I would sure like to see you make it down for this Brian and run that "rocketship" of yours on Wayne's Dyno! BTW,....have you run it on a dyno since you did all of your recent engine work?
--------
John_P
Brian:
I would sure like to see you make it down for this Brian and run that "rocketship" of yours on Wayne's Dyno!
BTW,....have you run it on a dyno since you did all of your recent engine work?--------
John_P
Im pretty sure i will make it.......havent dyno this setup yet. I will probably it drive it out there. I think it will be 600-650 hp. The turbo is pretty big. Hopefully it will put enough load on it to see the normal boost ( 60lbs ). Is the operator good on big turbo trucks?
02-27-2009, 06:35 PM
#14
Administrator
Thread Starter
Im pretty sure i will make it.......havent dyno this setup yet. I will probably it drive it out there. I think it will be 600-650 hp. The turbo is pretty big. Hopefully it will put enough load on it to see the normal boost ( 60lbs ). Is the operator good on big turbo trucks?
Brian:
Thanks for your reply buddy!
I would think you should be AT LEAST at 600-650 H.P.,....maybe more. Heck you are running 11.90 in 1/4 mile!
I think you are going to do real well Brian. And yes, the owner of the dyno there is Wayne Murphy. He has been running our diesel trucks there for years now and is excellent at getting the most out of the diesel trucks. As Lary Ellis (Top) said, he is a great guy too.
------
John
02-28-2009, 10:50 AM
#15
Registered User
John,I will not be able to make it my crew is going into the shop for as much of a restoration my wallet (wife) will allow. I found a newer 12 v and am converting it to a dually set up. I'm pretty excited and hope to have it done maybe by an early summer event. Have fun everyone.....Augie