Dyno Day @ "Waynes Dyno", J'Ville, N.C.
I wanted to let the NCDTR #18 Crew know that there will be at Dyno Day at "Waynes Dyno and Performance", 3789 Highway 258 (Richlands Highway),
Jacksonville, N.C. 28540 on Saturday March 28th, 2009. Doors will open at 10:00 A.M. and the event will last until 4:00 P.M. Cost for the dyno runs will be the same deals as always. Two (2) runs $40.00, four (4) runs $60.00. There will be a sign up list so get there early. CASH ONLY --------- John_P |
I'll try to make it down for this event.
|
Awesome!! That will be a perfect chance to test out the new tranny!!
|
Wayne's a GREAT guy and he has a terrific crew working with him there as well, always a good time at his shop :)
|
Originally Posted by John_P
(Post 2400098)
I wanted to let the NCDTR #18 Crew know that there will be at Dyno Day at "Waynes Dyno and Performance", 3789 Highway 258 (Richlands Highway),
Jacksonville, N.C. 28540 on Saturday March 28th, 2008. Doors will open at 10:00 A.M. and the event will last until 4:00 P.M. Cost for the dyno runs will be the same deals as always. Two (2) runs $40.00, four (4) runs $60.00. There will be a sign up list so get there early. CASH ONLY --------- John_P What kind of dyno is it? I might make it. |
It's a 248.
|
Originally Posted by 00PowerStroke
(Post 2401927)
What kind of dyno is it? I might make it.
Brian: I would sure like to see you make it down for this Brian and run that "rocketship" of yours on Wayne's Dyno![laugh] BTW,....have you run it on a dyno since you did all of your recent engine work? -------- John_P |
Perfect place to get some stock numbers on the '07. As long as I can get through the backyard that is [laugh]. It'll be great to see you guys again.
Chris |
Hey John, whos is hosting the event. Some of my buddies on the Ford site might be interested. As of now I will be there!!
|
Originally Posted by cadash
(Post 2402118)
Hey John, whos is hosting the event. Some of my buddies on the Ford site might be interested. As of now I will be there!!
Dan: It is Wayne Murphy's (Waynes Dyno Owner) event Dan. He hosts a few of these a year not including our diesel events there. |
Excellent!! Thank you. I will see if some of the Ford guys are interested. Maybe we can do a little grill out too!
|
I wonder if the grass has grown back yet.
|
Originally Posted by John_P
(Post 2402003)
------------------------------------------------------------------------
Brian: I would sure like to see you make it down for this Brian and run that "rocketship" of yours on Wayne's Dyno![laugh] BTW,....have you run it on a dyno since you did all of your recent engine work? -------- John_P Im pretty sure i will make it.......havent dyno this setup yet. I will probably it drive it out there. I think it will be 600-650 hp. The turbo is pretty big. Hopefully it will put enough load on it to see the normal boost ( 60lbs ). Is the operator good on big turbo trucks? |
Originally Posted by 00PowerStroke
(Post 2403017)
Im pretty sure i will make it.......havent dyno this setup yet. I will probably it drive it out there. I think it will be 600-650 hp. The turbo is pretty big. Hopefully it will put enough load on it to see the normal boost ( 60lbs ). Is the operator good on big turbo trucks?
Brian: Thanks for your reply buddy! I would think you should be AT LEAST at 600-650 H.P.,....maybe more. Heck you are running 11.90 in 1/4 mile![laugh] I think you are going to do real well Brian. And yes, the owner of the dyno there is Wayne Murphy. He has been running our diesel trucks there for years now and is excellent at getting the most out of the diesel trucks. As Lary Ellis (Top) said, he is a great guy too. ------ John |
John,I will not be able to make it my crew is going into the shop for as much of a restoration my wallet (wife) will allow. I found a newer 12 v and am converting it to a dually set up. I'm pretty excited and hope to have it done maybe by an early summer event. Have fun everyone.....Augie
|
All times are GMT -5. The time now is 09:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands