cowboy109

Ok all I need a little input of yours! My cp3/injection pump took a crap 2 weeks ago. The shaft that connects to the rear gear pump snapped. My truck is basically stock. K&n air intake, straight piped 4in exhaust and Quadzilla 100 horse programmer. I use this truck for plowing snow and pulling some trailers(nothing to heavy). I like to upgrade parts as they go bad and now I'm looking for your help on the best pump to buy. I'm thinking the 33% flow industrial injection pump but please give me your input!!!

jhenson

Since you have to buy a new pump anyway, if you want more fuel now is a good time to go for the higher flow unit if money isn't a problem. If funds won't allow it, you can always find a stock pump and add an Arson III kit to it for approximately 20-30% more fuel. Shop around and try to find the price that's suitable for you and for what you want.

RyeThomas

I agree with the above, a new pump not reman and an arson 3 is perfect. The issue with a built pump from Shane at motorsports or John at Floor is turnaround time. So the best thing is get a new pump ASAP, then order an arson 3 kit and when it comes in then you can install it. A built pump can take a few weeks to get.

cowboy109

I've already talked to Shane and he said the arson III kit is on back order and has no idea when the parts will be ready. Time is an issue for me cause I do need my truck back up and running ASAP. Shane also said he didn't have a pump that would work for me since I'm basically stock. I want to upgrade but also don't want to hurt the truck either since it's a work truck. I'd rather not put injectors in now but when that time comes I would like to go a step above stock. Have any of you used or no any good/bad about the industrial injection 33% more flow pump?

RyeThomas

I would, JMO get a new pump from someone and wait on the Arson 3. I would not get any pump besides a Motorsports, or Floor It. This is just my opinion, some have had good luck with industrial Injection.

han solo

I have heard about company in MN, something like TCI? Anybody used or know of them. Thanks

RyeThomas

Ohhh boy, I'm not going to get into it but I believe you are talking about T&C Diesel. Here's the thing, he is a nice guy, great prices, quick turnaround, but do a search on some of the other sites. With the Datalogging capabilities of EFI seems a lot of guys are seeing his pumps may not be flowing near what is advertised.
Again I have not dealt with Todd, nor am I trying to make him out as a bad guy. Just do your research, a lot of customers are not happy with the Performance of his pumps.

han solo

Ok, will do that. Took floor-it 1.5yrs do a pump for a truck I was working on. So turn around is very said, but the pump works great.