Wireless Air and Pacbrake bags
#16
Mike
#17
So have you had a chance to try out the remote yet. Is there a delay when you let off ? Does it work satisfactory.
#18
Remote works nice. Just scroll to the desired pressure then press enter and it instantly pumps or dumps! The display then shows what the actual pressure is in each bag while it pumps or dumps.
Pic is of 3/4" gap between bag bracket and exaust. It hasn't hit yet but if it does I'll have to do some cutting on the bracket.
Computer and valving mounted on inner frame rail.
remote
No pics of the compressor. I put it above the inner fender well behind the headlight.
Mike
Pic is of 3/4" gap between bag bracket and exaust. It hasn't hit yet but if it does I'll have to do some cutting on the bracket.
Computer and valving mounted on inner frame rail.
remote
No pics of the compressor. I put it above the inner fender well behind the headlight.
Mike
#19
Glad to hear it works good. Thank's for being the guine pig.
Is that some kind of heat shield. It looks like cardboard. If so, did it come with the kit, or is it something you came up with.
Is that some kind of heat shield. It looks like cardboard. If so, did it come with the kit, or is it something you came up with.
#20
The heat shield came with the bag kit and it's a thin piece of galvanized metal that I bent to my liking. I really couldn't get it in between the bag and the exaust 'cause it would definately hit then. No preblem on being the guine pig, when my wife says I can buy something for the truck I have to run with it and not look back before she changes her mind!
#23
Registered User
But ANYTHING is possible and can be done!
Tony
Thread
Thread Starter
Forum
Replies
Last Post
H8GAS
3rd Gen High Performance and Accessories (5.9L Only)
4
07-09-2013 09:53 PM
TXTad
3rd Generation Ram - Non Drivetrain - All Years
2
01-10-2012 11:23 AM