zrtwooo

just got my 04 2500 and thought it would have a factory harness for my prodigy, however i'm not sure what to look for... it has factory hitch and bumper hookup. i pulled the panel off that is under the steering wheel but dont see anything... now what? i really dont want to hard wire one....
Thx
Mike

Colo_River_Ram

Picture is on post # 2 of this thread..

https://www.dieseltruckresource.com/...s+plug+picture

zrtwooo

Thank you so much! I was looking way too hard in the wrong area...
So for real, It's plug and play?
Thanks again
Mike

MassZJ

For real dude.

Colo_River_Ram

Did you get the harness for Prodigy / Dodge like this one:

http://www.etrailer.com/p-3020-P.htm

If you did then yes it is P&P if not you need to find the factory Dodge harness and splice it to the harness that came with the prodigy unit.

Note: Not all of the colors are the same read the wires and the manual for proper wiring..

Here is what the 05 looked like with the prodigy mtd. I upgraded to the P3 as one of my trailers has elec / hyd brakes..