Any custom installed brake controllers?
#1
Registered User
Thread Starter
Join Date: Dec 2007
Location: North Dallas
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Any custom installed brake controllers?
I am looking for a custom installed in-dash option for a brake controller. I really would like to mount it in the middle consol somewhere so my left leg isn't always rubbing on the unit...anyone with any pictures/ideas? thanks
#5
Registered User
Join Date: Jan 2008
Location: sierra nevada mountains
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I'm so glad someone had a picture of how they did theirs!!!!!!!!!! I have an "07 and those damned "knee bolts", take up any free space I have when I pull my seat forward to drive, (I'm 5' 1" by the way) and I couldnt' see how anyone could have installed a brake box in the usual old place. I figured this was my last resort. Now mine has a not really a hole but a space up in the middle, figure that was for the brake control. Didn't you have a wiring harness and hook up behind that from the factory, mine does....
#6
Registered User
I'm so glad someone had a picture of how they did theirs!!!!!!!!!! I have an "07 and those damned "knee bolts", take up any free space I have when I pull my seat forward to drive, (I'm 5' 1" by the way) and I couldnt' see how anyone could have installed a brake box in the usual old place. I figured this was my last resort. Now mine has a not really a hole but a space up in the middle, figure that was for the brake control. Didn't you have a wiring harness and hook up behind that from the factory, mine does....
#7
mine is in the cubby where the seat heater controls would be. in my opinion, this is one of the best locations for a brake controller. im at work and dont have any pics, but other people have placed it in the same place and posted some...ill see what i can find
brett
brett
Trending Topics
#10
Registered User
Join Date: Jan 2008
Location: sierra nevada mountains
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Thanks so much all! These ideas are all great, although I will stick with the spot behind my shifter, easier with that space there to feed the wiring harness through.
Thanks again for the picutes, explains so much easier!
Thanks again for the picutes, explains so much easier!
Thread
Thread Starter
Forum
Replies
Last Post