Bhaf
Bhaf
ok so i need a list of BHAF's, im looking for Part #'s, suppliers, prices.
i have heard of an Amsoil filter, is it reusable? if so how much?
right now i am in the process of getting materials for a Old Smokey/ exhaust, intake system, i am looking for some good stuff that will last and will not bite me in the backside later on down the road, but i would also like to stay on my bombing budget.
i have heard of an Amsoil filter, is it reusable? if so how much?
right now i am in the process of getting materials for a Old Smokey/ exhaust, intake system, i am looking for some good stuff that will last and will not bite me in the backside later on down the road, but i would also like to stay on my bombing budget.
From the Tech Facts page
What are the part numbers for the BHAF?
Answer: Fleetguard AH19037
NAPA 2790
WIX 42790
Donaldson B105006
Baldwin PA2820
Hastings AF1012
AFE 20-40044
Carquest 87790
John Deere pmah19037
Big A 93790
Caterpillar 3i0005
Fleetrite ahr819037
Luber-finer laf2531
Fram ca6818
UNI 908
Outerwear cover wr3325-105
Edit: I use the wix BHAF and like it. Still less than 30 clams, I think. Try www.fleetfilter.com

What are the part numbers for the BHAF?
Answer: Fleetguard AH19037
NAPA 2790
WIX 42790
Donaldson B105006
Baldwin PA2820
Hastings AF1012
AFE 20-40044
Carquest 87790
John Deere pmah19037
Big A 93790
Caterpillar 3i0005
Fleetrite ahr819037
Luber-finer laf2531
Fram ca6818
UNI 908
Outerwear cover wr3325-105
Edit: I use the wix BHAF and like it. Still less than 30 clams, I think. Try www.fleetfilter.com
Filter1.com is their factory direct outlet. Lower cost if you buy at least $50 for no shipping fee. Lower than Fleetfilter if you factor in the no shipping rate. It's easy to buy $50 worth of filters a couple times a year if you have more than a couple vehicles to maintain.
well i got the filter, now im working on a mount, my only problem is the old smokey mount, i dont think it fits too well with the A/C thingy
on one side and rad over flow on the other. so this is what i did, its a two peice cardboard piece, with a couple extra holes cut for the ratchet strap bungee cord. is there any better way to make this. me and my dad are going to a local shop, here in town ( he does business with) that are letting us to some scrap, and a metal break, so any idea please help.
on one side and rad over flow on the other. so this is what i did, its a two peice cardboard piece, with a couple extra holes cut for the ratchet strap bungee cord. is there any better way to make this. me and my dad are going to a local shop, here in town ( he does business with) that are letting us to some scrap, and a metal break, so any idea please help.
Thread
Thread Starter
Forum
Replies
Last Post
Performance and Accessories 2nd gen only
12
Feb 22, 2024 07:16 AM



