How hard is it to get in touch with Rod? Recieved an email from him last night then responded to him but no answer as of yet.

 

Call him you will have better luck and get to talk to a heck of a nice guy who will not try to power sell ya well maybe a sheep or two!

 

Usually he's pretty quick. May be a little busy.

 

As Jamie said, you'll often have better luck hooking up with us if you crank off a call to 306.862.5829. We keep standard shop hours Monday - Friday, 8am - 5pm Saskatchewan Time Zone. If you get message manager, just leave a message and someone will get back with you ASAP.<br><br>Some days, I know its a little frustrating getting ahold of us, as we're a small shop (we have big dreams of hiring a secretary to answer phones someday ;D). Our current response time on calls is anywhere between 15 minutes to 2 hours. Email response is lagging a bit these days, but we've been trying to respond within 12 hours (we're getting between 50 and 100 emails/day).<br><br>Rod

 

Hey Rod what is the hiring process for that secretary!

 

Call Rod, <br> He is a great guy and you will enjoy speaking with him. He is very knowledgeable about these trucks and easy to talk to.<br><br> You wont be sorry you did!

 

Right now, the hiring process is pretty simple: If you'll work for a $1 a day, you're hired :-)<br><br>Rod

 

a dollar a day where do I sign up?

 

$1 a day? Sweet! 8)<br><br><br>That oughta get the new CTD paid for in what???<br><br>17,000 years???<br><br>Should have your million miles on her by then!

 

Hey Rod I think I need a new pyro tip what you got for me!

 

:<br><br>A dollar a day in canuck bucks? <br><br>I want a raise.

 

With that high salery you could buy a begel in toronto after 5 days!

 

[quote author=Jamie Attridge link=board=7;threadid=12759;start=0#120666 date=1048704259]<br>Hey Rod I think I need a new pyro tip what you got for me!<br>[/quote]<br><br>Pyro Tip Of the Day - When your EGTs read 1800F, thats bad.<br><br>Jamie, all I got around here is the IssPro thermocouple, which will only work with IssPro gauges....

 

Thats what I have now Im trying to find a fitting before I made one and welded it to the downpipe now I want to tap into the manifold so I need a a coupler with 1/4&quot; NPT on one end and I think 3/8&quot; fine on the other! :'(

 

[quote author=Jamie Attridge link=board=7;threadid=12759;start=0#120692 date=1048709215]<br>Thats what I have now Im trying to find a fitting before I made one and welded it to the downpipe now I want to tap into the manifold so I need a a coupler with 1/4&quot; NPT on one end and I think 3/8&quot; fine on the other! :'(<br>[/quote]<br><br>The R658S thermocouple is exactly that. Its 1/4&quot; NPT into the manifold, and it has a 3/8&quot; slip joint to allow for adjustment of the thermocouple itself.<br><br>Rod