Wildcat diesel
How hard is it to get in touch with Rod? Recieved an email from him last night then responded to him but no answer as of yet.
|
Re:Wildcat diesel
Call him you will have better luck and get to talk to a heck of a nice guy who will not try to power sell ya well maybe a sheep or two!
|
Re:Wildcat diesel
Usually he's pretty quick. May be a little busy.
|
Re:Wildcat diesel
As Jamie said, you'll often have better luck hooking up with us if you crank off a call to 306.862.5829. We keep standard shop hours Monday - Friday, 8am - 5pm Saskatchewan Time Zone. If you get message manager, just leave a message and someone will get back with you ASAP.<br><br>Some days, I know its a little frustrating getting ahold of us, as we're a small shop (we have big dreams of hiring a secretary to answer phones someday ;D). Our current response time on calls is anywhere between 15 minutes to 2 hours. Email response is lagging a bit these days, but we've been trying to respond within 12 hours (we're getting between 50 and 100 emails/day).<br><br>Rod
|
Re:Wildcat diesel
Hey Rod what is the hiring process for that secretary!
|
Re:Wildcat diesel
Call Rod, <br> He is a great guy and you will enjoy speaking with him. He is very knowledgeable about these trucks and easy to talk to.<br><br> You wont be sorry you did! ;)
|
Re:Wildcat diesel
Right now, the hiring process is pretty simple: If you'll work for a $1 a day, you're hired :-)<br><br>Rod
|
Re:Wildcat diesel
a dollar a day where do I sign up?
|
Re:Wildcat diesel
$1 a day? Sweet! 8)<br><br><br>That oughta get the new CTD paid for in what???<br><br>17,000 years???<br><br>Should have your million miles on her by then! [laugh] [laugh] [laugh]
|
Re:Wildcat diesel
Hey Rod I think I need a new pyro tip what you got for me!
|
Re:Wildcat diesel
::)<br><br>A dollar a day in canuck bucks? [laugh]<br><br>I want a raise.
|
Re:Wildcat diesel
With that high salery you could buy a begel in toronto after 5 days!
|
Re:Wildcat diesel
[quote author=Jamie Attridge link=board=7;threadid=12759;start=0#120666 date=1048704259]<br>Hey Rod I think I need a new pyro tip what you got for me!<br>[/quote]<br><br>Pyro Tip Of the Day - When your EGTs read 1800F, thats bad.<br><br>Jamie, all I got around here is the IssPro thermocouple, which will only work with IssPro gauges....
|
Re:Wildcat diesel
Thats what I have now Im trying to find a fitting before I made one and welded it to the downpipe now I want to tap into the manifold so I need a a coupler with 1/4" NPT on one end and I think 3/8" fine on the other! :'(
|
Re:Wildcat diesel
[quote author=Jamie Attridge link=board=7;threadid=12759;start=0#120692 date=1048709215]<br>Thats what I have now Im trying to find a fitting before I made one and welded it to the downpipe now I want to tap into the manifold so I need a a coupler with 1/4" NPT on one end and I think 3/8" fine on the other! :'(<br>[/quote]<br><br>The R658S thermocouple is exactly that. Its 1/4" NPT into the manifold, and it has a 3/8" slip joint to allow for adjustment of the thermocouple itself.<br><br>Rod
|
All times are GMT -5. The time now is 11:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands