Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

What should my egts be?

Thread Tools
 
Search this Thread
 
Old Dec 21, 2004 | 05:24 PM
  #1  
mitch@jc'sCTD's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 147
Likes: 0
From: Hicktown USA aka Perry County
What should my egts be?

What should my egts be if all that is done is stock plate all the way foreward and star wheel turned all the way. What about boost? what should it be?
Reply
Old Dec 21, 2004 | 05:33 PM
  #2  
MnTom's Avatar
Registered User
 
Joined: Nov 2002
Posts: 1,234
Likes: 0
From: outside of Duluth MN
Anything below 1250*. Really, you will probably run about 550-600 empty on flat ground at 60 mph. Keep an eye on it and you won't have any trouble. I can pull mine any way I want and not have to worry about the EGTs.
Tom
Reply
Old Dec 21, 2004 | 06:28 PM
  #3  
infidel's Avatar
Registered User
 
Joined: Dec 2003
Posts: 14,672
Likes: 9
From: Montana
1250° max is ok pre-turbo 950°-1000° post.
You'll probaly max out at 20-22 boost and cruise at under 5 psi
Reply
Old Dec 22, 2004 | 06:37 PM
  #4  
MnTom's Avatar
Registered User
 
Joined: Nov 2002
Posts: 1,234
Likes: 0
From: outside of Duluth MN
Originally posted by infidel
1250° max is ok pre-turbo 950°-1000° post.
You'll probaly max out at 20-22 boost and cruise at under 5 psi
Thanks Bill, I forgot the pre turbo part
Reply
Old Dec 22, 2004 | 06:51 PM
  #5  
banks twinram's Avatar
Registered User
 
Joined: Nov 2004
Posts: 491
Likes: 0
From: corpus christi texas
my 96 freightliner with a 500 cat and 18 speed will run 1200 all day long post turbo.. it never had a problem in 650,000 miles. its about due for rod bearings and mains i think. but still runs like a brand new one, burns a gallon every 1000 miles or so
Reply
Old Dec 22, 2004 | 06:54 PM
  #6  
infidel's Avatar
Registered User
 
Joined: Dec 2003
Posts: 14,672
Likes: 9
From: Montana
I do to Tom.
Was talking with a guy a few weeks ago and he kept saying his egts were too high at 950°. The guy seemed to know diesels very well and I didn't want to say his temps were just fine. Wasn't till later I realized he was post turbo.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sleeperman
Performance and Accessories 2nd gen only
5
Jun 6, 2011 07:04 AM
4969joes
12 Valve Engine and Drivetrain
14
Apr 25, 2010 12:34 PM
sallyman1
3rd Gen High Performance and Accessories (5.9L Only)
21
Jun 17, 2009 10:37 PM
omaharam
3rd Gen High Performance and Accessories (5.9L Only)
1
Oct 19, 2006 10:33 AM
Boojie_00786
1st Gen. Ram - All Topics
2
Aug 15, 2004 11:26 AM




All times are GMT -5. The time now is 04:44 PM.