Well boy I finally did it I (we RamRodd/DTR) fabbed up a set of traction bars for the dodge. They are about 78" long and made of 1/4" thick round tubing. all the plating is 1/4" steel. they will plate to the bottom of the u bolts and we fabbed up some killer brackets for the frame. I'll get some pix tomorrow or I'll at least try my new comp is a pain in the butt for reading the wife's dig. cam. got them painted up tonight and mounted tomorrow


THANKS SHAWN!!!!! Remember my offer for help this summer like I said I forsure owe you a full days work for all your help. you are freaking awesome man

 

Sounds good.. Waiting for pics

 

http://www.srt-4mation.com/images/sm...out%20pics.gif

Just kidding =P Sounds nice. Just plug the camera into the usb port and chances are windows will find the pics for you =P

 

here are some pix I did get them on tonight but I ran out of batteries so no pix actually on the truck those tomorrow in the light. http://www.cardomain.com/my/edit_page?page_id=2763052


by the way they work awesome!!!!!!

 

congrats on the bars!


btw, your link dont work... it shows the login screen for cardomain...

 

here try this http://www.cardomain.com/id/Kyletaylor_62 Guys click the truck and go to page 2 for bar pix

 

Mind if I asked where you acquired all the parts?

 

Just a steel place and a tractor supply company

 

I wonder if you could have just taken two more brackets like the first one and ran some u bolts over the frame instead of drilling it.

 

i like them, it may be my project this weekend. so how do you like them. so all i need is some 1/4 inch thick tubing, 1/4" plate, longer u bolts, and the joints to bolt up to the brackets. just make them 78" long with it all assembled.

 

psd mine are 78" tubing then the joins welded on so i'm guesing around 83-85" total including joints