Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Stacks

Thread Tools
 
Search this Thread
 
Old May 12, 2005 | 04:23 AM
  #1  
running4bhs's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 205
Likes: 0
From: San diego, CA
Stacks

Not sure if this is the right place to post but I would like to know where i can shop for stacks for a 96 dodge ram with a cummins. Anyone know of any sites?
Reply
Old May 12, 2005 | 05:42 AM
  #2  
1st gen Hobie's Avatar
Registered User
 
Joined: Jun 2004
Posts: 341
Likes: 0
From: West Illinois
https://www.dieseltruckresource.com/...1&cat=8&page=1
This guy is in AZ so it should be easier to ship. If you try to buy a setup from a store you're gonna spend about $500.
Reply
Old May 12, 2005 | 05:51 AM
  #3  
running4bhs's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 205
Likes: 0
From: San diego, CA
yes I have seen those, but thats not really what I was looking for, but I might make do with that. I wanted something that had a rolled tip and kind of wanted to put it up in the front not in my bed. Already have a gooseneck back there and a toolbox.
Reply
Old May 12, 2005 | 11:10 AM
  #4  
Bobcat698's Avatar
Registered User
 
Joined: Mar 2005
Posts: 1,146
Likes: 0
From: Amherst, WI
Try Here:
http://www.blackclouddiesel.com/Stacks/stacks.htm
Reply
Old May 12, 2005 | 11:56 AM
  #5  
Forrest Nearing's Avatar
Banned
 
Joined: Jan 2004
Posts: 2,800
Likes: 0
please dont' put a rolled edge on stacks!!! LMAO!!!!
Reply
Old May 12, 2005 | 02:24 PM
  #6  
Bobcat698's Avatar
Registered User
 
Joined: Mar 2005
Posts: 1,146
Likes: 0
From: Amherst, WI
Originally posted by Forrest Nearing
please dont' put a rolled edge on stacks!!! LMAO!!!!
LOL I think he means turn outs!
Reply
Old May 12, 2005 | 02:25 PM
  #7  
Forrest Nearing's Avatar
Banned
 
Joined: Jan 2004
Posts: 2,800
Likes: 0
mercy, I hope so!!!
Reply
Old May 12, 2005 | 05:58 PM
  #8  
Saxet Nomad's Avatar
Registered User
 
Joined: Dec 2003
Posts: 203
Likes: 0
From: Guy, TX
Another place I found...Stacks
Reply
Old May 12, 2005 | 06:32 PM
  #9  
Meatball's Avatar
Registered User
 
Joined: Jul 2004
Posts: 109
Likes: 0
From: Johnstown Pa
airflow online is great, i have dealt with em, great customer service, ask for smitty! Not meant to be an ad for em, delete it if its breaks the rules.
Reply
Old May 13, 2005 | 12:08 AM
  #10  
2k1yzfr1's Avatar
Registered User
 
Joined: Jul 2004
Posts: 161
Likes: 0
From: Waco,TX
Does anyone know anybody that makes them where the miters are level with the top of the truck and cant be seen from the front?
Reply
Old May 13, 2005 | 04:35 AM
  #11  
running4bhs's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 205
Likes: 0
From: San diego, CA
I was talking to someone in my shop today and they told me not to bother with stacks because there would be little or no back pressure and that would make my truck run like crap. Anyone know anything about this, because I tought that my truck didnt need any back pressure.
Reply
Old May 13, 2005 | 07:56 AM
  #12  
CarolinaThunder's Avatar
Registered User
 
Joined: May 2005
Posts: 97
Likes: 0
From: Charlotte, NC
Whoever you were talking to musta been thinking about a Gasser or possible a non-turboed diesel? Your turbo puts enough backpressure on your engine as it is.

And your goal is to get it as UN-restrictable as possible. Are you wanting to run stacks with or without a muffler. I'm sure me and everyone else would like to see ya without the muffler!
Reply
Old May 13, 2005 | 08:50 AM
  #13  
Bobcat698's Avatar
Registered User
 
Joined: Mar 2005
Posts: 1,146
Likes: 0
From: Amherst, WI
Originally posted by CarolinaThunder
Are you wanting to run stacks with or without a muffler. I'm sure me and everyone else would like to see ya without the muffler!
If you run without a muffler/resonator, I'd definately be careful. If your local law enforcement is picky or in a bad mood, you are in for a ticket..

I ran 5" exhaust with 5" mitre cut stacks with no muffler and go away with it for about 2 weeks, then I was warned to take it easy because the truck was quite loud. I ordered a5 inch Aeroturbine and it was on backorder.
Two weeks later when I went back to town (without the muffler on) they followed me and issued a ticket.. I was taking it REAL easy.

Now that I have the Aeroturbine, they've left me alone for the most part.

These trucks are LOUD when set up with 5" exhaust and 5" stacks! I can rattle the shot glasses sitting on a rack on the wall in my buddies house when I leave..
Reply
Old May 13, 2005 | 08:52 AM
  #14  
Bobcat698's Avatar
Registered User
 
Joined: Mar 2005
Posts: 1,146
Likes: 0
From: Amherst, WI
Originally posted by 2k1yzfr1
Does anyone know anybody that makes them where the miters are level with the top of the truck and cant be seen from the front?
Here is my truck
Those are 36" stacks.
Depending on who you order from, just ask that the stacks be cut down or cut them yourself.
Reply
Old May 13, 2005 | 10:15 AM
  #15  
I SPEED's Avatar
Registered User
 
Joined: Jun 2004
Posts: 552
Likes: 1
From: Arundel, Me.
How about these guys....Berube's
Reply



All times are GMT -5. The time now is 08:53 PM.