what are common inlet and outlet sizes? i just bought one and wondering if theres away to ID it from the tag or not? thanks

 

Call Haisley Machine. The only other thing is that with your set up you would want the 80mm exhaust housing. you can also get them in I believe 110,120,130? I also think that they all have a three inch inducer so if you are planning in pulling in the street class you will have to get a shim from haisleys to get it down to the 2.8 limit.

 

The s-400 I ran last year had a 2.5 compressor wheel with a 110 exh. housing. I wouildn't go any bigger exh. housing. Mine didn't lite until 2500 rpm with almost an identicle set-up to what you are running. With a torque enhancer D box I only got 43-45 lbs of boost, never had a problem with the HG at that level

 

thanks for the info...i plan on going back to haisleys next weekend again when i get it and see what van has to say about it...what injectors were you running 24vpuller?

 

same as you, I don't believe they were big enough though. Haisley's charger has a 2.8 wheel and lites a little easier. A guy back here runs one with an auto and a Redline box with the same injectors as you and he does really well

 

so what do you think about the 80 housing on the street as a single? probably be too laggy, and i rarely ever pull trailers. i dont know anything about it yet, i bought it off ebay so it may even need a rebuild

 

I have driven mine around alot with the s-400 and it is laggy and smokey until 2500 rpm with the VP The smaller housing would definitely help

 

awesome well i cant wait to get it, ill take pics and put them on the on here this weekend