Rebuild your oun Holser turbo
01-02-2008, 01:02 AM
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Jonesboro, TEXAS
Posts: 1,269
Likes: 0
Received 0 Likes
on
0 Posts
Rebuild your oun Holset turbo
here is a link to Holset to down load manuals for all there turbos. I found this and it is nice to have a brake down of everything, and tq specks I had to wing it on everything but the tq the 1st time I did it. Holsets are very easy to do. Just thought I would share this. Just pick the turbo you want. I down loaded 10 of them. Even for my HT-60 that I plan to make twins out of some day
. I really prefer to do all my own work if I can. This also gives you shaft play limits if you are getting a used turbo. Hope this helps. If nothing else it's cool to look at.
http://www.holset.co.uk/files/4_4_1-...%20manuals.php
. I really prefer to do all my own work if I can. This also gives you shaft play limits if you are getting a used turbo. Hope this helps. If nothing else it's cool to look at.http://www.holset.co.uk/files/4_4_1-...%20manuals.php
01-02-2008, 10:17 AM
#2
Registered User
Join Date: Oct 2004
Location: St Augustine, Florida
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Here is a link to High Tech Turbo, also a useful site when rebuilding your Holset.
http://www.htturbo.com/hp.html
http://www.htturbo.com/hp.html
Thread
Thread Starter
Forum
Replies
Last Post
Totallyrad
Other
15
09-20-2013 04:31 PM
CumminsRedneck
24 Valve Engine and Drivetrain
1
02-18-2013 07:51 PM
kawi600
12 Valve Engine and Drivetrain
2
06-21-2006 06:48 AM