Proven 500+hp combos for H.O.'s ??????
09-27-2005, 11:26 AM
#1
Registered User
Thread Starter
Join Date: Nov 2003
Location: St.Helena, CA.
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Proven 500+hp combos for H.O.'s ??????
I'm not sure if I will have the funds to get there, but incase I do, what will I need in addition to what I have already to get 500+hp out of my 2001 H.O.?? Can it be done without a HotRod VP44? Will Mach 4's be enough injector? what is a proven recipe for 500+hp out of an H.O. truck? I'm not sure where I am as of now, but I'll know in October after I dyno.
09-27-2005, 11:24 PM
#4
Registered User
With the stock VP IMO mach 4's or 4.5's (4.5's are the biggest you can go on a stock HO VP) a comp box or a fueling box and timing box stacked, turbo/s. This would get ya close.
With a HRVP - Mach 4's, drag comp or TST comp and timing box, turbo/s. This would get you well over 500.
With a HRVP - Mach 4's, drag comp or TST comp and timing box, turbo/s. This would get you well over 500.
09-28-2005, 02:43 AM
#5
Registered User
Join Date: Aug 2005
Location: fredericksburg, virginia
Posts: 3,465
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95ram
With the stock VP IMO mach 4's or 4.5's (4.5's are the biggest you can go on a stock HO VP) a comp box or a fueling box and timing box stacked, turbo/s. This would get ya close.
With a HRVP - Mach 4's, drag comp or TST comp and timing box, turbo/s. This would get you well over 500.
With a HRVP - Mach 4's, drag comp or TST comp and timing box, turbo/s. This would get you well over 500.
And with a HRVP the sky's the limit?
09-28-2005, 05:53 AM
#6
Registered User
Join Date: Apr 2005
Location: Wisconsin
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Well, 485hp and 1205 for torque, and still HX35. So if I can clean up the wasted power out the pipe with a set of twins, I ought to have it. I still have the HO VP. Working on getting a SO pump to work in the truck, I just need the numbers off of a '01 5 spd ECM so that I can get one for my truck and switch over............let ya know when it is done. Jim.
Trending Topics
09-28-2005, 09:29 AM
#8
Registered User
Thread Starter
Join Date: Nov 2003
Location: St.Helena, CA.
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Bart, mind sharing your combo? Was that on a Mustang or Dynojet?
The dyno I run on is a Mustang and I heard they are usually a few hp less than a dynojet....true?
The dyno I run on is a Mustang and I heard they are usually a few hp less than a dynojet....true?
09-28-2005, 06:50 PM
#10
Registered User
ETH/DEE are the factory order codes for the HO motor and 6-speed trans.
Drag Comp, F1 mach3s, B1-2 got me 434hp and 1006torque with 37" BFG mudders and 3.54 gears. I don't recall who, but someone with the same hard parts hit 495 with 4.11 gears and 35" tires.
Drag Comp, F1 mach3s, B1-2 got me 434hp and 1006torque with 37" BFG mudders and 3.54 gears. I don't recall who, but someone with the same hard parts hit 495 with 4.11 gears and 35" tires.
09-28-2005, 07:10 PM
#11
Registered User
Join Date: Apr 2003
Location: Cummins Technical Center, IN
Posts: 6,564
Likes: 0
Received 6 Likes
on
5 Posts
Originally Posted by CTD_Neil
I'm not sure if I will have the funds to get there, but incase I do, what will I need in addition to what I have already to get 500+hp out of my 2001 H.O.?? Can it be done without a HotRod VP44? Will Mach 4's be enough injector? what is a proven recipe for 500+hp out of an H.O. truck? I'm not sure where I am as of now, but I'll know in October after I dyno.
M4s should take you past 500. HRvp with 4s will take you WELL past 500.
At that power level, you're into big single charger range: sledpuller 66, Phat Shaft 66, J.R.s Lil 55 or a full B1. Any hx40-class charger is out of its league.
I see no reason why you couldn't hit 500 with M4s, a stock HO pump, and a single turbo. It WILL take an aggressive box, like a Drag Comp, or Competition Powermax or Blue Chip Redline.
JMO
09-29-2005, 08:08 PM
#15
Registered User
Two things I'll share about my combo which ought to stir up the pot a little bit. I'm running an unmodified stock air box with a K&N filter and the rubber boot removed. I'm also running 2 mufflers on my 4" Jardine exhaust to keep it quiet as possible. Listening to some folks around here, changing to a BHAF and straight pipe ought to be worth 10 or 20 extra ponies.