Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Power estimate?

Old Jan 24, 2008 | 11:33 PM
  #1  
1BAD4X4's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 433
Likes: 0
From: Sioux Falls, SD
Power estimate?

Okay guys I hate to do this, but I'm wondering what kind of numbers am I going to be making here pretty soon. I'm not worried about a rwhp estimate b/c I know half of it won't make it to the drive shaft let alone the ground... Don't worry thats being addressed soon enough. But the mods will be BHAF, J-hook, 4" down pipe to 5" stacks, FASS HPFP kit, adrenaline beta(I only run it on the highest setting), and jammer 5s all on the HY. Yeah I know the jammers will be hot... after this is all complete a turbo will be added shortly there after.



Conservative estimates please, I'd rather be pleasantly suprised then disappointed when it comes to dyno it(when the power can get to the wheels).
Reply
Old Jan 25, 2008 | 03:59 AM
  #2  
Fishin2Deep4U's Avatar
Registered User
 
Joined: Mar 2002
Posts: 1,276
Likes: 0
From: The Great Northwest!
I once made 448 with an HY, comp and Mach 4's. Toasty was an understatement! The exhaust never came close to clearing up.

Dave
Reply
Old Jan 26, 2008 | 03:15 AM
  #3  
1BAD4X4's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 433
Likes: 0
From: Sioux Falls, SD
What rating are the Mach 4s? I know everyone says the jammers are hot and smokey... but if its as bad as being smokey at all rpms then I just might wait to install them until I get a bigger spooler.



What makes the jammers run so much hotter and smokier then others?





Any other guessimates?
Reply
Old Jan 26, 2008 | 03:42 AM
  #4  
qzilla's Avatar
Registered User
 
Joined: Jun 2003
Posts: 3,741
Likes: 0
I would think anything over 425 on the HY should make you grin. If you pop a real charger on it I would think closer to 475 to the tires is doable.
Reply
Old Jan 27, 2008 | 03:01 AM
  #5  
Fishin2Deep4U's Avatar
Registered User
 
Joined: Mar 2002
Posts: 1,276
Likes: 0
From: The Great Northwest!
I made 465 on M4's and a HX35/ 12.

Twins went to 545.

Dave
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ryan10
1st Gen. Ram - All Topics
4
Oct 4, 2007 08:11 PM
jstrdiesel
Performance and Accessories 2nd gen only
6
Aug 23, 2007 07:47 PM
midwestdually
3rd Generation Ram - Non Drivetrain - All Years
7
Nov 8, 2004 08:41 PM
kingofdodge7131
Towing and Hauling / RV
2
Jun 8, 2004 12:47 PM
apache
Towing and Hauling / RV
5
Mar 24, 2004 05:38 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:23 AM.