estimate my power?
estimate my power?
Hey guys, anybody have any idea what kind of power my truck is putting down? havent dyno'd it yet
here are the mods:
tranny: A518, professionally built by northeast performance diesel
2nd motor: about 1.5 turns on full power screw, starwheel 1 turn from bottom, smoke screw in 2 turns. Bully dog fuel pin, 14 cm wastegated housing, bully dog injectors.
Also, i just ordered a water meth kit today. the kit is a 150 psi pump with a dual nozzle set up, 1 12 GPH nozzle and one 6 GPH nozzle.
can anybody tell me about what kind of power my truck is gonna have with the water meth?
thanks
here are the mods:
tranny: A518, professionally built by northeast performance diesel
2nd motor: about 1.5 turns on full power screw, starwheel 1 turn from bottom, smoke screw in 2 turns. Bully dog fuel pin, 14 cm wastegated housing, bully dog injectors.
Also, i just ordered a water meth kit today. the kit is a 150 psi pump with a dual nozzle set up, 1 12 GPH nozzle and one 6 GPH nozzle.
can anybody tell me about what kind of power my truck is gonna have with the water meth?
thanks
Not sure on the water meth, but I'll take a guess at the horse power of your rig.
I'd have to say somewhere in the 260-280hp range and somewhere around 600 ft lbs for torque. The A518 isn't going to let the power get to the rear wheels with a non-lockup converter like a 47RH with a lockup converter will.
I'd have to say somewhere in the 260-280hp range and somewhere around 600 ft lbs for torque. The A518 isn't going to let the power get to the rear wheels with a non-lockup converter like a 47RH with a lockup converter will.
Thread
Thread Starter
Forum
Replies
Last Post
midwestdually
3rd Generation Ram - Non Drivetrain - All Years
7
Nov 8, 2004 08:41 PM




