No Cruize

Reply Subscribe

Thread Tools

Search this Thread

Jun 5, 2006 | 06:52 PM

bradmar08

Thread Starter

Registered User

Joined: May 2006

Posts: 11

Likes: 0

From: ohio

No Cruize

2001 Dodge Ram Just Installed Juice With Attitude, New Injection Pump And A Fass Fuel Pump Driving Home And Noticed I Don't Have Cruize. The Light Cruize Comes On But Will Not Set Any Ideas

Jun 5, 2006 | 07:24 PM

CTD01

Registered User

Joined: May 2006

Posts: 559

Likes: 0

From: CT

Cruise

You might not have connected the cruise cable. Just look could be that light would still come on.

Jun 5, 2006 | 08:01 PM

bradmar08

Thread Starter

Registered User

Joined: May 2006

Posts: 11

Likes: 0

From: ohio

cable is hooked up just checked

Jun 6, 2006 | 08:34 AM

CTD NUT

Chapter President

Joined: May 2004

Posts: 3,539

Likes: 7

From: Caistor Centre, ON, Canada

Any codes? You might have a 1595 DTC.....I would check that first.

Jun 6, 2006 | 04:12 PM

Diesel-Dan

Registered User

Joined: Sep 2003

Posts: 2,534

Likes: 0

From: Plano, TX

Check you Vacuum line at the Vacuum pump (In-between the PS pump and gear housing)......i bet you pulled it when you did the IP........

Jun 6, 2006 | 08:49 PM

AggieJustin

Registered User

Joined: Jul 2002

Posts: 2,242

Likes: 16

From: Celina, TX

Also check to see if you have other vacuum operated functions, like switching your air from defrost to panel or floor vents. If you have a leak anywhere in the vacuum system, you'll lose cruise. I've seen the line down to the front axle fall on the turbo housing and melt in two before.