Jambbii

Hello, I am wondering what moving the TST plate forward would do. Any more hp? If so what do I do, oh yeah I have a #4.

Cummnzpowr

Move it around 75%-80% of full forward...you'll notice the most HP there...full forward doesn't always mean HP..just more smoke and loss of HP

Jambbii

So I am guessing forward is towards the front end of the truck? Do I need to make any adjustments to anything else?

Thanks

Got Smoke?

[quote author=Jambbii link=board=7;threadid=19357;start=0#msg181839 date=1062999973]
So I am guessing forward is towards the front end of the truck? Do I need to make any adjustments to anything else?

Thanks
[/quote]

Only your face! ;D

WHIFF

[quote author=Got Smoke? link=board=7;threadid=19357;start=0#msg182005 date=1063042768]
[quote author=Jambbii link=board=7;threadid=19357;start=0#msg181839 date=1062999973]
So I am guessing forward is towards the front end of the truck? Do I need to make any adjustments to anything else?

Thanks
[/quote]

Only your face! ;D
[/quote]

Cummnzpowr

you can put in a less stiff spring in the AFC housing for better bottom end fueling,and a boost elbow from TST or Piers in the Turbo compressor housing

Jambbii

What exactly does moving the plate forward do, is there less contact on the arm and therefore it can move up the plate faster and in turn more fuel? Just kinda curious to know a little more before I do this.

thanks ;D

Cummnzpowr

It allows the fuel rack to move forward more allowing more fuel to enter the lines from the injection pump

Jambbii

Excelent , thanks again ;D