mod help
what do you have in mind there are lots of mods you can do to the 12v just search around then ask questions but first you need to know what direction you want to take your truck.
sled puller
drag racer
or all around more power
sled puller
drag racer
or all around more power
Start with guages that way you can figure out what your truck is doing. after that I would start with upgraded intake and exhauset then I would change the fuel plate. I would not go to much more with out upgrading your transmission.
I dont have much exp. with the 12v but there is alot of info and people that are pulling 1000hp out of 12v's so just do alot of searching and you will find more info than you comprehend
I dont have much exp. with the 12v but there is alot of info and people that are pulling 1000hp out of 12v's so just do alot of searching and you will find more info than you comprehend
Thread
Thread Starter
Forum
Replies
Last Post
Kenworth
Performance and Accessories 2nd gen only
2
Jul 15, 2008 04:18 PM
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
4
Dec 19, 2007 12:49 AM
jamesbfishin
3rd Gen Engine and Drivetrain -> 2003-2007
6
Jul 7, 2007 08:25 PM
wap
3rd Gen High Performance and Accessories (5.9L Only)
14
Apr 23, 2007 06:46 PM
RAMV
3rd Gen High Performance and Accessories (5.9L Only)
9
Jul 14, 2004 12:08 PM



