Mechanical Boost gauge

Reply Subscribe

Thread Tools

Search this Thread

Nov 2, 2006 | 07:00 PM

CTD01

Thread Starter

Registered User

Joined: May 2006

Posts: 559

Likes: 0

From: CT

Mechanical Boost gauge

Ok I'm going to be installing a mechanical boost gauge, where is the best place to install it? My buddy has his on the back of the intake horn is this the best place for one? Thanks,

Paul

Nov 2, 2006 | 07:03 PM

P.J

Banned

Joined: Jan 2005

Posts: 0

Likes: 2

From: Port Deposit, MD

www.dieselmanor.com

They made a "boost bolt", makes the boost gauges the easiest of them all to install (literally).

Some people do drill and tap the horn, but with an 01 and up, I say why?

Nov 2, 2006 | 07:23 PM

Shovelhead

Administrator / Scooter Bum

Joined: Sep 2002

Posts: 9,086

Likes: 49

From: Central VA

Quote:

Originally Posted by P.J

www.dieselmanor.com

They made a "boost bolt", makes the boost gauges the easiest of them all to install (literally).

Some people do drill and tap the horn, but with an 01 and up, I say why?

'Cuz it means you get to pull the wrenches out, and amaze your non-mechanically inclined friends with you proficiency in drilling & tapping for the fitting.

Nov 2, 2006 | 07:46 PM

slim51015

Registered User

Joined: Oct 2003

Posts: 338

Likes: 0

From: NE Pa.

To the left or the right (I cant remember of hand) of the map sensor theres a 3/4 npt plug. You could remove it and reduce it down to 1/8npt.

Nov 2, 2006 | 09:42 PM

daniel

Registered User

Joined: Oct 2005

Posts: 194

Likes: 0

From: lexington, ky

i used the boost bolt on my 01.

Nov 2, 2006 | 09:59 PM

somis13

Registered User

Joined: Mar 2006

Posts: 342

Likes: 0

From: somis,CA.

just TEE in where the wastegate gets it from

Nov 3, 2006 | 11:37 AM

infidel

Registered User

Joined: Dec 2003

Posts: 14,672

Likes: 9

From: Montana

Slim's is the easiest way. There is a 1/2" square drive plug right by the fuel filter. Take it out and install a 3/4" x 1/8" bushing then your tubing.