Marine Headgasket
01-11-2005, 08:54 AM
#1
Registered User
Thread Starter
Join Date: Apr 2002
Location: Hershey, PA
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
Marine Headgasket
Ok guys this is for all of you with a 24v that have replaced you OEM headgasket with a 20 thousandths over marine gasket.
How do you like it?
Does it smoke upon startup?
Any trouble starting?
Loss/gain of noticeable power?
Also please post if you had the head milled and if so how much. Also please post if you have an ETC or an ETH. I have 3 trucks that we are O-ringing and I am considering using this gasket. All of the trucks are between 500-600 HP single charger with boost levels below 60 psi.
Thanks for your input.
Doug
How do you like it?
Does it smoke upon startup?
Any trouble starting?
Loss/gain of noticeable power?
Also please post if you had the head milled and if so how much. Also please post if you have an ETC or an ETH. I have 3 trucks that we are O-ringing and I am considering using this gasket. All of the trucks are between 500-600 HP single charger with boost levels below 60 psi.
Thanks for your input.
Doug
Thread
Thread Starter
Forum
Replies
Last Post