how do I jump the signal wire to the 5v for my juice?

 

locate the 5vdc wire, with a multimeter. that is the sensor power wire from the ecm. then locate the sensor output wire, .05vdc at idle, 5.0vdc at full boost. that is the sensor out to the ecm. all you need is to install a switch inline of the 2.
dont leave it on much, dont try to start it with the switch on. i assume you are trying to make a smoke switch?

 

thanks, does anyone know the color of the wires I dont have a multimeter

 

i will have to go home and look tonight