info on this turbo
Thread Starter
Registered User
Joined: Feb 2009
Posts: 27
Likes: 0
info on this turbo
The model # is S400S069 the P/N # 631GC5153AM2X the S/N # J3102 351 R9. Its says it is made for mack truck and has Mack trucks stamped on the comp. housing. I somewhat measured it and the inducer is around a 65mm and the exhaust wheel is around a 71mm or 72mm. The comp housing has 053A and 673121 A stamped on it. The exhaust housing has 697828 DUC384 and 125 B-2 stamped on it. Any input on this will be helpful as far as wat its worth and the input on ppl that have ran one of this as a single. I think it would be good as a single but its kinda small to use as the bottom charger on a twin setup. This truck is a daily driver and im planning on pulling it and racing it as soon as i get some better driveline parts.
Thread Starter
Registered User
Joined: Feb 2009
Posts: 27
Likes: 0
The model # is S400S069 the P/N # 631GC5153AM2X the S/N # J3102 351 R9. Its says it is made for mack truck and has Mack trucks stamped on the comp. housing. I somewhat measured it and the inducer is around a 65mm and the exhaust wheel is around a 71mm or 72mm. The comp housing has 053A and 673121 A stamped on it. The exhaust housing has 697828 DUC384 and 125 B-2 stamped on it. Any input on this will be helpful as far as wat its worth and the input on ppl that have ran one of this as a single. I think it would be good as a single but its kinda small to use as the bottom charger on a twin setup. This truck is a daily driver and im planning on pulling it and racing it as soon as i get some better driveline parts.
Thread
Thread Starter
Forum
Replies
Last Post
donhov
3rd Gen Engine and Drivetrain -> 2003-2007
4
Oct 12, 2007 11:44 AM
donhov
Other
9
Aug 16, 2006 11:42 PM
ramguy
1st Gen. Ram - All Topics
5
Jul 3, 2003 07:46 AM