I have a 2001 Cummins, I bought the FASS 150/95-1008 fuel pump system. I read the installation directions, but I'm still lost on it. Has anyone installed one of these on their truck's?

I called up a few dealerships to see if they could install it, and they said NO.

 

--------------------------------------------------------------------------
TurboRacer:

I installed a FASS 180 GPH with the fuel filter and water separator on my 1996
Dodge CTD 12 valve 4X4. IMHO, the step-by-step instructions provided by FASS were very good. IMHO, the hardest part was dropping the fuel tank, drilling the hole in the top of the fuel tank for the bulkhead fittings and tank pickup and then running all the fuel line, return lines etc. It wasn't that hard, just time consuming.

I would suggest calling FASS and speak with Dan McDonald there. He can probably give you the name of a dealer/installer in your area that could put the FASS in for you.

----------
John_P

 

If you are having apprehensions about your install, I would suggest talking to a local dealer and see if they could assist you on the install.

Click here for our dealer locator…..