Okay I've got my dad's old 2002 and the IP went out . A friend took of the old pump off and disconnected the edge programer .He's got the new pump on . Anyway he has one wire that needs to be spliced itno one of the wires on the IP . It's going to go to one for two wire at the top of the Ip ,one being closest to the valve cover or the the one closest to the fender ? All the wires from the edge selector had plug-in and we knew where they went.

 

Have you tried Edge's website? They should have install instructions on whatever programmer you have.
http://www.edgeproducts.com/

 

Got thanks