got my new turbo!
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: loveland CO
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
got my new turbo!
i got my new turbo today and this thing is HUGE . a heck of a lot bigger then what i thought. i have pics of it in my gallery. it looks like it will end up being my bottom turbo. it uses a t7 flange but other then that i don't know much more about it. it is a schwitzer 4le-303 turbo. if any one has used or heard of these turbo. let me know what you have heard or think of them
#3
Registered User
Join Date: Nov 2005
Location: Lancaster, Ky
Posts: 599
Likes: 0
Received 0 Likes
on
0 Posts
Errrr..... Ummmm..... I just did a lil searchin and from everything I can find that turbo is made to support 800 HP So u might have a bit of trouble spoolin that bad boy. But im not for sure if thats what u have or not. Where did u get it? Are u using it for your bottom turbo on a set of twins??
#7
Registered User
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
Really the compressor wheel is too small for a good set of high horsepower twins.
Also, for a small set of street twins the large compressor housing will probably hurt spool up alot.
You could have it sent off and have a bigger compressor wheel and housing to match it installed but then you would be running into the price of the performance turbo you should have just bought in the first place.
I would put that thing back on Ebay.
Also, for a small set of street twins the large compressor housing will probably hurt spool up alot.
You could have it sent off and have a bigger compressor wheel and housing to match it installed but then you would be running into the price of the performance turbo you should have just bought in the first place.
I would put that thing back on Ebay.
Thread
Thread Starter
Forum
Replies
Last Post
Dale M
3rd Gen High Performance and Accessories (6.7L Only)
4
03-05-2011 03:40 PM
bhoff1175
1st Gen. Ram - All Topics
3
06-07-2006 10:19 PM