FP Guage Installed
Thread Starter
Registered User
Joined: Jul 2005
Posts: 169
Likes: 0
From: South Dakota
FP Guage Installed
Hey,
I'd like to thank everyone who contributed their guidance / insight, to my FP gauge installation . I ordered my FP gauge kit from www.AccurateDiesel.com and everything went very smoothly. I tied the FP line in directly to my VP44 and did modify the kit a tad by adding a shut off valve just off the VP44. (Felt this was pretty critical, as I did not use an isolator.)
Fired her up and my gauge is showing 13psi at idle. (Still running all original / stock lift pump / fuel components.) Have yet to get her out and open her up to check for WOT psi.
Thanks again to everyone !
I'd like to thank everyone who contributed their guidance / insight, to my FP gauge installation . I ordered my FP gauge kit from www.AccurateDiesel.com and everything went very smoothly. I tied the FP line in directly to my VP44 and did modify the kit a tad by adding a shut off valve just off the VP44. (Felt this was pretty critical, as I did not use an isolator.)
Fired her up and my gauge is showing 13psi at idle. (Still running all original / stock lift pump / fuel components.) Have yet to get her out and open her up to check for WOT psi.
Thanks again to everyone !
Thread
Thread Starter
Forum
Replies
Last Post
jgiachino
3rd Gen High Performance and Accessories (5.9L Only)
4
Jul 23, 2007 04:29 PM
trik396
3rd Gen High Performance and Accessories (5.9L Only)
17
Jun 14, 2007 02:36 PM
rjm022
3rd Gen High Performance and Accessories (5.9L Only)
2
Nov 23, 2006 11:29 AM
bigragu
1st Gen. Ram - All Topics
4
Jan 24, 2006 11:16 AM
ram4fun
Performance and Accessories 2nd gen only
13
Mar 14, 2003 11:14 PM