RowJ

Need 1-1/2" flexpipe in stainless for an external wastegate project..see gallery & below.

Found galvanized...will probably work as not exposed to steady stream of exhaust, but would like to find stainless steel. Anyone know where to go for it?

RJ

got...DIESEL?

Here RJ, see if any of these help

http://www.mesamarine.com/AIM.htm#AIM

http://www.dmeexpansionjoints.com/ex...connectors.htm

http://www.jcwhitney.com/webapp/wcs/...10101&ss=10101

good luck
Chris

RowJ

Excellent sources...Thanks. Waiting to hear back from them but looks promising!

I Googled for an hour and found none of these...should have come to DTR first.

RJ

Don M

I have used burns stainless in the past, but not sure if they have any flex pipe.

HKS makes a nice flex pipe for wastegates, but they are spendy.

http://www.hksusa.com/products/?id=809

Don~

RowJ

Thanks Don...their longers piece is 8" (stocked)...and it's $64.00??? Seems outragous to me...and I need/want about 3 feet to run it a couple of feet down the exhaust pipe. Think doing so is unnecessary? This is all uncharted territory for me.

RJ

Don M

Does your B-1 have a wastegate? Maybe it woud be easier to activate?

Yes, the stainless stuff is out of sight expensive.

Don~

RowJ

No wastegate in my B-1. Found a 42" piece of 1-1/2" stainless in Calif, from DME (above)....$68.00 + UPS. Thanks again Chris.

RJ