Well i got my edge ez and dont know why i didnt get one sooner but i ran into problems with it when im towing. In fourth and fifth with a load i have to really feather the throttle or my rear end starts bucking pretty bad. I noticed it a little to without a load. The conclusion i have come to is that there is too much torque for not having a rear sway bar. Anyone else run into this problem?

 

I hope your problem is not my problem. Turned out in my case the bucking was my transmission. The torque converter slipping. When I disconnected the EZ it stopped, although I may have damaged the tranny because if I really goose it even without the EZ I get bucking or shudder. Now I'm in line for a new Transmission.

 

sounds like you might be at to low of an rpm. if you have the stock clutch be careful, the spring plate will come apart with the torque at heavy pedal and low rpm's.

 

Its not at a low rpm it does it around 1500 up to 2200 is the thing so im not really sure what the problem is and its five speed so im thinking it shouldnt be with tranny. I have always had problems with it bucking anytime i spin out in the snow so im thinking im in need of a sway bar if i can find one for a decent price im goin to put one on.

 

guys it could be axle wrap I used to get this pulling my six place enclosed v nose sled trailer look into ladder bars