New here but have been reading for a while. I installed a cooleeze exhaust elbow 2wk. ago and would like to know if anyone on here is using one and how is it working for you . The only thing i have done to my rig is the bhaf.and stock 3.5 straight pipe. I have gauges and i seem to be running about 100+ degs. lower temp. on the same pulls. It feels like my throttle response is more like a gasser now. on a long hill at 65mph. my egts. stay lower and my boost is lower to keep that speed. I want to install a 4" exhaust later on but now i don`t know if i will need to . I think for those with the 4" exhaust now this is easy bolt up . it went in and bolted right up to my stock pipe.

 

WELCOME to DTR ! Glad to hear from some of the ones that have installed the Cooleze, we've only heard from a few. We are like penguins around here, waiting for the first one to jump in I guess. I am definetly going to get a Cooleze elbow soon. Glad to here your positive reaction !

 

Thanks for the review. Sounds like a good bomb.

 

I installed a cooleeze and am having problems with an exhaust leak on the connection to the stock exhaust pipe. It's small but definately there! Warmed engine up to NOT and tightened the bolts. Still leaks. The angle from the cooleeze does not quite match up with the stock exhaust like the stock elbow. Also noted that this only is benefitial when the waste gate is bypassing exhaust. I may have to go back to stock elbow. Will contact Cooleeze Performance on Monday to see if they have any solutions. I might have gotten a defective part. Any ideas anyone?

 

$200 for a tiny elbow! WHAT?! My whole exhaust was only $110 more with a muffler and it's excellently made by pinnacle performance.