cold air intake
I just installed an S&B and I really like it. My EGT's are really low now (<500* @ 65-70 mph cruise) and the engine seems to run much quieter at higher rpm's. I posted a thread with pics on another site. I don't think they'll allow me to post a link here, so PM me and I'll share the link with you.
the S&B is okay
I installed the S&B and it's okay. I like that it draws its' air from the stock hole in the side and not the engine compartment.
Thought about opening it up a bit more by poking a hole through the bottom of the box and through the fender, then laying a piece of oiled foam across the bottom of the box.
Thought about opening it up a bit more by poking a hole through the bottom of the box and through the fender, then laying a piece of oiled foam across the bottom of the box.
i have an AFE stage two and without the silencer rings all i can hear is that sweet whistle. I would never trade for another. But i recomend getting prefilter so you dont have to clean it that much
Trending Topics
I am in the process of building a CIA for mine, Can have some pictures up later if your interested, Ad removed site violation I am using an Amsoil Cone filter. Flows better than a K&N and doesnt need oil like an AFE. Cheaper too.
Thread
Thread Starter
Forum
Replies
Last Post
Taquache
3rd Gen High Performance and Accessories (5.9L Only)
21
Jun 24, 2012 03:11 PM
ollie32
3rd Generation Ram - Non Drivetrain - All Years
3
Jul 16, 2009 05:02 PM
Dodgewincity
3rd Gen High Performance and Accessories (5.9L Only)
13
Jan 19, 2008 05:41 AM
xloudnproud
Performance and Accessories 2nd gen only
2
Apr 5, 2006 06:38 AM



