Is anyone familiar with this particular part number (Bosch 300hp injectors, part number 0 432 193 635)?? Is this another number for RV275's, or an entirely different injector itself? Good or bad?
Thanks

 

If they are advetised as 300hp I would suspect they are. They make a 275, 300, 330, and 360.

They have been good to me for the past two years.

 

Those are 275's.

 

What piperca said. They are 275, and the Bosch are darn good sticks!!!

 

So the Bosch 360's would be considered 120hp injectors approximately? Any site links for a look see.

Ron

 

Does anyone know the different part numbers for Bosch injectors? I really just need the numbers for the 330s and 360s. Is there a website where I can find them? Thanks.

 

To the best of my knowledge, the 330 and 360 sticks are for the 12 valve motors. I think the only Bosch injectors that we can slap into our 24V's are the Bosch RV275's (also referred to as 300's).

 

I don't know for sure, but Smokindog's sig says he has "Bosch 360s". I know that there are 300 and 370 sticks for 12 valve trucks.

 

I found that odd as well. I have never heard of Bosch 360's for a 24V.

 

The RV275s and the "300" injectors are the one and the same. Some clown on ebay started calling the Rv injectors "300s" so, in order not to lose sales, they all had to call them that. Check the part #s, they are the same.

 

Before I got my 275's I was hunting on Ebay. I contacted the seller to verify the part number because I was wondering if they were the 300 injectors used in the ISB 300. I got nothing but grief from these sellers. They claimed that I was the competition and that the part number would not be disclosed until I purchased.

I got my 275's from Midwest fuel injection. Incidentally, even they are calling them 300's now.

Just a marketing ploy...

 

Ya know, I got mine dropped in when I did the transmission in Denver so I don't have the part number on them. They roll a pretty good cloud, but for all I know they could just be 275's. I'm just about ready to pull the trigger on the Mach 4's so we'll find out when I swap them...