Anyone else run into this problem?
Thread Starter
Registered User
Joined: Aug 2006
Posts: 220
Likes: 0
From: Clarksburg, WV
Anyone else run into this problem?
After FASS 150 HPFP install and mods in my sig my FP pulls down pretty easily untill the FASS eventually shuts down. The newer FASS units have a safety feature that shuts the pump down when resistance is detected. Anyway, do y'all figure the stock draw straw and screen is my weak link? Fuel filter is new and I have a big line kit. Any thoughts?
Registered User
Joined: Aug 2005
Posts: 7,780
Likes: 0
From: Airdrie, Alberta
Not really sure what the problem is, but I drove my truck with the 150 GPH FASS with stock draw straw, and never had low fuel pressure or shut down issues. I gained about 1 psi pressure when I put in the bigger draw straw.
Thread
Thread Starter
Forum
Replies
Last Post
littlebigtruck
3rd Gen High Performance and Accessories (5.9L Only)
1
Aug 12, 2010 10:19 AM
turbov6joe
3rd Gen Engine and Drivetrain -> 2003-2007
18
Dec 4, 2008 08:15 PM
moparsupremist
1st Gen. Ram - All Topics
7
Apr 24, 2005 01:12 AM
GotCummins?
3rd Generation Ram - Non Drivetrain - All Years
22
Jun 15, 2004 10:31 AM