adrenaline past factory fueling
Thread Starter
Registered User
Joined: Jun 2006
Posts: 280
Likes: 0
From: rhode island
adrenaline past factory fueling
well i just pulled my head to change the gasket again and noticed that i must have been getting some serious valve float because you can see slight marks on top of the pistons
from the valves. i thought i was being careful with my stock valve springs and rpms. i have the 2000 tune loaded in my adrenaline. i checked the data logger and it says it has been to 3600rpms. i know with my old edge comp it fueled to 2700 and not much past that. i was wondering if anyone else has noticed this.
from the valves. i thought i was being careful with my stock valve springs and rpms. i have the 2000 tune loaded in my adrenaline. i checked the data logger and it says it has been to 3600rpms. i know with my old edge comp it fueled to 2700 and not much past that. i was wondering if anyone else has noticed this.
Registered User
Joined: Mar 2004
Posts: 1,110
Likes: 0
From: Iowa
well i just pulled my head to change the gasket again and noticed that i must have been getting some serious valve float because you can see slight marks on top of the pistons
from the valves. i thought i was being careful with my stock valve springs and rpms. i have the 2000 tune loaded in my adrenaline. i checked the data logger and it says it has been to 3600rpms. i know with my old edge comp it fueled to 2700 and not much past that. i was wondering if anyone else has noticed this.
from the valves. i thought i was being careful with my stock valve springs and rpms. i have the 2000 tune loaded in my adrenaline. i checked the data logger and it says it has been to 3600rpms. i know with my old edge comp it fueled to 2700 and not much past that. i was wondering if anyone else has noticed this.
mishkaya
Thread
Thread Starter
Forum
Replies
Last Post
duster75
3rd Gen Engine and Drivetrain -> 2003-2007
4
Feb 15, 2009 09:44 AM
Hummin Cummins
3rd Generation Ram - Non Drivetrain - All Years
6
Feb 4, 2003 04:26 PM