hey all,
i have the wifes 2003 liberty in my stall at work getting ready to put it on the frame rack and make some pulls. long story short..............
she got t-boned last week and i am fixing it at work.
i need a measurement for the b pillar. it was pushed in about 2 inches and i need to pull it back out before i cut it off and replace it.
what i am looking for is a measurement from the pinch welds on the passenger side and the drivers side at the door latch strikers. you will need to pull the weather strip loose on both sides to take the measurement. the striker is the goldish metal loop that the latch grabs when the door is latched. it will be a 2 person measurement one to hold the tape and one to read it. remember this is a very important measurement so accuracy is paramount.
any questions please ask.
thanks.

 

If no luck here, you might ask on jeepsunlimted.com.

 

have you got this yet? if not email me and I ll get the BOSS's Liberty and take it for you

 

have not got it yet. that would great thanks.

 

Post a pic of where exactly you need the measurement jsut to be sure we are on the same page, and Ill do it tis evening when she gets home

 

[QUOTE=Chrisreyn;2604060]Post a pic of where exactly you need the measurement jsut to be sure we are on the same page, and Ill do it tis evening when she gets home[/QUOT

ok, i got it uploaded. please click the link. thanks.

http://yfrog.com/0q1015090823aj

 

Our '05 gave me a measurement of 56-15/16" Outside edge to outside edge

 

yes, they are the same.
thanks for your help.
did the link sow the pic ok?
how was my first attemp at paint shop? don't have a very steady hand i guess. lol

 

Yeah, the pic helped, I had an idea what measurement you needed but that def. cleared it up...and the paint looks pretty good from what I could see in the pic. I know my first time was pretty rough lookin, you usin an HVLP?

 

i won't painting it after i repair it. i will let the painter take care of that. i hung up my guns years ago. i still dabble here and there but not on the wifes rig. she is too picky for me. i need to get the pillar pulled out before i cut it off and prep it for the new pillar.
thanks again.

 

Sorry yfz450guy!! The BOSS didnt get home till late.. I am guessing you dont need this from me now?