Make Your Own High Performance Injectors!!!
Thread Starter
Banned
Joined: Feb 2002
Posts: 0
Likes: 0
Make Your Own High Performance Injectors!!!
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
Sure sounds like something I'd want to do.
I also found JetPilot's truck for sale. If I had any money, I'd make him an offer.
Sure sounds like something I'd want to do.
I also found JetPilot's truck for sale. If I had any money, I'd make him an offer.
Registered User
Joined: Nov 2001
Posts: 3,733
Likes: 264
From: Austria Europe
Description
this press is in excellent condition with all hardware.i drilled the injectors in my 2002 cummins with it.it comes with 25 carbide drill bits that cost $5 each. the vise was purchased from australia and was $75.drill was $145. item sold as is so feel confident you can drill your own.
i also have some blank tips that i intend to sell later.
this press is in excellent condition with all hardware.i drilled the injectors in my 2002 cummins with it.it comes with 25 carbide drill bits that cost $5 each. the vise was purchased from australia and was $75.drill was $145. item sold as is so feel confident you can drill your own.
i also have some blank tips that i intend to sell later.
I could have told him that injectors are only for sissies- 1/2" pipe will flow manly amounts of fuel- and even bubba can weld it together.
Don: Are you frustrated that you had to buy some fancy equipment for much $$$ and now there's this drill for only $175.-
AlpineRAM
Thread
Thread Starter
Forum
Replies
Last Post
shaft
3rd Generation Ram - Non Drivetrain - All Years
4
Jun 14, 2005 11:55 AM