black stack?
Thread Starter
Registered User
Joined: Aug 2006
Posts: 2,436
Likes: 0
From: Cresson/Stephenville Texas
black stack?
Ive seen some people on here with black stacks? Can you purchase them that way? If so where? I found some paint for exhaust,but would rather find them already black.
Thread Starter
Registered User
Joined: Aug 2006
Posts: 2,436
Likes: 0
From: Cresson/Stephenville Texas
Registered User
Joined: May 2006
Posts: 181
Likes: 0
From: Joplin MO
Abso-tively my man!
Here it is, http://www.jet-hot.com/
Never used them myself, but heard great things about them!
Still waiting on quote.
Here it is, http://www.jet-hot.com/
Never used them myself, but heard great things about them!
Still waiting on quote.
Registered User
Joined: May 2006
Posts: 181
Likes: 0
From: Joplin MO
I got the quote today. I was hoping for better, but can't say I'm too surprised!
Here's my request:
Hello, would like a quote for coating a 48" long 5" diameter,
straight exhaust pipe. The pipe is bare steel, and will be used as a
single stack pipe on my Cummins powered 3/4 ton truck. I would prefer the
flatter of the two black coatings (matte, or 2000) Temps should be below
800F.
Thank you for your time.
And here is the quote/reply I got.
If you go with our 1300F black we would charge you $145 to coat your
pipe. The 2000 would be done for $200, and while it is a flatter color,
it also has a textured finish. We're running about 2 weeks in house to
do the job, and in case you don't have it our address is:
Jet-Hot Coatings
5602 Orchard Road
Pascagoula MS 39581
Thanks
Here's my request:
Hello, would like a quote for coating a 48" long 5" diameter,
straight exhaust pipe. The pipe is bare steel, and will be used as a
single stack pipe on my Cummins powered 3/4 ton truck. I would prefer the
flatter of the two black coatings (matte, or 2000) Temps should be below
800F.
Thank you for your time.
And here is the quote/reply I got.
If you go with our 1300F black we would charge you $145 to coat your
pipe. The 2000 would be done for $200, and while it is a flatter color,
it also has a textured finish. We're running about 2 weeks in house to
do the job, and in case you don't have it our address is:
Jet-Hot Coatings
5602 Orchard Road
Pascagoula MS 39581
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
1985cucv
3rd Generation Ram - Non Drivetrain - All Years
20
Apr 21, 2009 06:48 PM
coreydr2003
3rd Gen High Performance and Accessories (5.9L Only)
36
Aug 13, 2008 10:40 PM
gerdes15
3rd Gen High Performance and Accessories (5.9L Only)
8
Mar 18, 2008 06:59 PM
CSAKing
3rd Generation Ram - Non Drivetrain - All Years
8
Oct 29, 2007 08:03 PM
djmenke
3rd Gen High Performance and Accessories (5.9L Only)
4
Oct 1, 2007 06:46 PM
