anyone use this guys stuff?
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: kelowna
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
anyone use this guys stuff?
I hope the link will work ,and if anyone has used this stuff ,let me know how it is.I wanna fit 37's .My truck is a 01 3500 dually qc 5spd.Im thining a 5 or 6 inch lift.The truck wont go offroad and will be mainly for looks.Any other suggestions on a lift and tires and also what spacers on the rear wheels must be needed would be appreciated http://cgi.ebay.ca/Dodge-Ram-Lift-Ki...QQcmdZViewItem
Last edited by kelownadiesel; 02-08-2007 at 05:50 AM. Reason: forgot the link
#2
Registered User
Thread Starter
Join Date: Mar 2006
Location: kelowna
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
#3
Registered User
Join Date: Jul 2006
Location: Elk Grove Village, IL
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
I wouldnt put that on a cummins. Heck, I wouldnt put that on a half ton. I've been wheelin for many years and its allways stuff like that that you see twisted like a pretzle.
#4
Registered User
Join Date: Nov 2005
Location: Nashville, TN
Posts: 1,318
Likes: 0
Received 0 Likes
on
0 Posts
That looks the Rock Ready Guy's stuff. That's his truck in the picture. He's a member of a couple other message boards im on. I havent run it on my truck but wouldnt hesitate to. Its beefy. And its definately not going to twist like a pretzel.
#5
Advocate of getting the ban button used on him...
Depends on if his "Rollcage Tubing" he uses is DOM or HREW and the actual wall thickness. It could be 1 3/4 with .090" or 1 3/4 with .250". (and others) I would ask first. Still look pretty flimsy to me but that is just MHO.
Thread
Thread Starter
Forum
Replies
Last Post
supersix4
3rd Gen High Performance and Accessories (5.9L Only)
10
07-24-2009 04:27 AM
Bulldawg
Introductions / New People
7
11-20-2008 02:42 PM
bocuso
3rd Gen Engine and Drivetrain -> 2003-2007
27
01-18-2007 12:54 PM