anyone use this guys stuff?
 

I hope the link will work ,and if anyone has used this stuff ,let me know how it is.I wanna fit 37's .My truck is a 01 3500 dually qc 5spd.Im thining a 5 or 6 inch lift.The truck wont go offroad and will be mainly for looks.Any other suggestions on a lift and tires and also what spacers on the rear wheels must be needed would be appreciated http://cgi.ebay.ca/Dodge-Ram-Lift-Ki...QQcmdZViewItem

I wouldnt put that on a cummins. Heck, I wouldnt put that on a half ton. I've been wheelin for many years and its allways stuff like that that you see twisted like a pretzle.

That looks the Rock Ready Guy's stuff. That's his truck in the picture. He's a member of a couple other message boards im on. I havent run it on my truck but wouldnt hesitate to. Its beefy. And its definately not going to twist like a pretzel.

Depends on if his "Rollcage Tubing" he uses is DOM or HREW and the actual wall thickness. It could be 1 3/4 with .090" or 1 3/4 with .250". (and others) I would ask first. Still look pretty flimsy to me but that is just MHO.