John_P

I spoke with Phil McMaster earlier today and he has set up a tentative date of Saturday February 17, 2007 for a Dyno Day/GTG at "Carolina Auto Masters" in Winston Salem, N.C.

We have had dyno days at this location before and the owner there has treated us very well! He has a Dynojet 248C with the heavy rollers and our diesel trucks always seem to run well on his dyno. Many of the newer NC DTR Members have asked about having some events, so here is one for all to attend.

More information will follow from Phil McMaster (McMopar) on exact times etc.

-------
John_P

Mike D

John, Thanks for the heads up buddy.

Eskimo

Cool.. thanks for the info.


Do we have to pull the duals?

sqrl$$

Keep us posted, I would really like to get mine on the dyno. Just really getting into the mods. Juice w/attitude, airaid intake, 325/60/18 Nitto Tera grapplers, 2" revtek leveler kit.

Mcmopar

I stopped by Jeff's shop in Durham yesterday to shoot the bull and see what dates and times were available for a Dyno day.

Jeff has the date JP mentioned above or if that won't work for us he has some April dates available. Please let me know. As some of us know Jeff is a really great guy and is real "gentle" with our trucks.

I will check pricing once I get a rough idea of how many want to Dyno. Last year I think it was 50.00 for 3 pulls. One thing Jeff did tell me was NO STACKS, last time we coated a new Chevy Slowvette and he had to shell out a bunch of money to have it cleaned -Sorry about that Jeff!!

I would like to get this off the ground, I tried this fall while I was in Alabama, but Jeff and I could never work out a day that worked.

So, what I need from you guys is a choice of Feb. or April and who will Dyno.

Thanks guys

McMopar

Mcmopar

Yes you will, Jeff lets us use his floor jack outside the shop.

John_P

Phil:

My vote is for the original date you and I taled about; Saturday February 17, 2007.

So,....let me start the list:

DYNO DAY @ "Carolina Auto Masters" (Saturday February 17, 2007)

1.) John_P--------96' Dodge CTD

BRUISER

I will be there to atleast check out the other trucks..

and if some of ya are willing to help me tune mine while I am there I may be willing to run it on the dyno and see how bad the truck does.. ( it is pretty much stock ).

So questions: 1st post says Winston Salem, but Phils post said he stopped by guys shop in Durham?? so where is it gonna be??

Mcmopar

DURHAM, at least it's west of Raleigh!!

Mcmopar

Below are directions from my house, some of the guys have been at my place.


1: Start out going WEST on PAGE RD toward JOHNSTON RD. 0.1 miles

2: Turn RIGHT onto JOHNSTON RD. 0.5 miles

3: Turn RIGHT onto NC-42. 3.3 miles

4: Merge onto I-40 W. 32.3 miles

5: Merge onto NC-147 N via EXIT 279B toward DURHAM / DOWNTOWN. 7.2 miles

6: Take the FAYETTEVILLE ST exit- EXIT 12A- toward NC CENTRAL UNIV. 0.1 miles

7: Turn RIGHT onto FAYETTEVILLE ST. 0.1 miles

8: Turn LEFT onto RAMSEUR ST. 0.1 miles

9: Turn RIGHT onto S ELIZABETH ST. 0.1 miles

10: End at 113 S Elizabeth St
Durham, NC 27701-3764, US

Carolina Auto Masters
113 South Elizabeth Street, Durham, NC 27701

BRUISER

OK I will be there for sure..

Keep us posted on price per rig..

BC847

That's just up the road a piece, and I'm off call.

I'll be on the rollers in Durham Feb.17.

PapaSmurf

Hello
I plan on being there, if we need numbers I'll dyno.
I haven't added anything new.

John
keep us posted on when you want to leave for out west.

See Ya
Chris

sqrl$$

I'm in. Hopefully will be "hot" juice by then. Just have to see if trans will hold. I have a buddy with a Duramax, any problems with Chevy's coming?

Mcmopar

Not a problem, just make sure he has thick skin