there is a dyno day scheduled for dec 14 in meridian idaho at meridian motor sports. the dyno is a dyno-jet. cost will be 45 bucks but will be less if we have more than 12 people. to reseve the dyno it takes a 25 dollar down. contact jay [JGK] on nwb or tdr or doug at meridian motor sports. or mail the reserve to the address posted on the nwbombers thread. more discusion on the event is at http://www.nwbombers.com/ on the idaho project forum, idaho dyno day. you can post any more comments or questions here or gimme a pm if ya wish

 

Is that Edge's building in that photo?<br>Before the parking lot and exhaust ducting was done?<br><br><br>phox

 

10-4 phox

ya gonna make it up here phox

 

Probably not, bit of a ride for me.
Can't get out of work Friday till 11pm, drive all night to get there by morning, 5 hour drive according to Yahoo.

Still stock too, would like a baseline though.

Maybe next time.
Or maybe Edges annual Utah Dyno Days, if they do it again next year.


phox

 

I am heading up. I'll be leaving Kaysville at Approx noon on Friday if anyone wants to car pool up....

 

The truck in that picture looks like cumminstrokin's old ETH when it was on Edge's dyno. <br><br>I'm going to try to make it to your dyno days if possible.

 

if it works out,,,,,,,will be dynoing an 03 ho. bullydogs box might be init by then. one of local ford dlrs is tryin to have a 6.0 psd for they dyno too

 

TIT ( . ) ( . )

take it topward



;D

 

bullydog is bringing 3 rigs. an 03 eth-dee with twins and a box and injectors. an 02 chevy duramax with a box. and an 03 ford 6.0 psd with [censored]. shld be a good show.<br><br>got a bunch comin now, both for the rollers and for spectatin.

 

tommorrow be the day ;D<br><br> <br><br>