replaced Lift pump and IP and no turbo now?
Registered User
Joined: Nov 2001
Posts: 3,733
Likes: 264
From: Austria Europe
Take a look at the wiring- maybe something got unplugged or a cable damaged when swapping the pumps.
Remove air intake hose and try to spin the turbo with your fingers- look for play and scuffing of the intake housing.
The MAP sensor is close to the fuel filter in the cyl. head- a big one which will take a 32mm deep socket to remove. (could also be the culprit)
HTH
AlpineRAM
Remove air intake hose and try to spin the turbo with your fingers- look for play and scuffing of the intake housing.
The MAP sensor is close to the fuel filter in the cyl. head- a big one which will take a 32mm deep socket to remove. (could also be the culprit)
HTH
AlpineRAM
Thread
Thread Starter
Forum
Replies
Last Post
buba1960
24 Valve Engine and Drivetrain
1
Feb 19, 2008 03:27 PM
89dieselkong
24 Valve Engine and Drivetrain
5
Dec 18, 2007 11:38 PM
ethamblin
3rd Gen Engine and Drivetrain -> 2007 and up
12
Nov 17, 2007 02:26 PM
