P1693....need advice quickly
#16
Hey Larry. Tried your method and had no luck. Guess I'll be buying a new apps. I tried a few shops up here and was told by one shop that the APPS are vehicle specific and would have to take the truck in to match it up (part would still need to be ordered) and another shop told me these are only available through Chrysler!!
#18
I had the dash go to the "No Buss" code. Tried this and that and finally found the plugs not in all the way on the back of the cluster.
After getting it running and the cluster working I now have the P1963 and a P1968 code. It seems to run just fine.
Is there a way to clear the codes without a reader?
After getting it running and the cluster working I now have the P1963 and a P1968 code. It seems to run just fine.
Is there a way to clear the codes without a reader?
Thread
Thread Starter
Forum
Replies
Last Post
RyeThomas
3rd Gen High Performance and Accessories (5.9L Only)
18
02-26-2010 09:00 PM
Joe V
1st Gen. Ram - All Topics
6
01-18-2004 06:08 AM