"No Bus" No Start
"No Bus" No Start
I have a '99 2500 and got off work today and went out to start my pickup. it started fine for about 1 second, then fell on its face. i first thaught it was airlocked for some reason so i cracked the first injector and went to turn the key on and my guages never came up and my quadzilla monitor never came on. i did the 3 key turn trick and a "no bus" message appeared in the odometer.
i called a friend and he said that in the fusebox inside the engine compartment there is a big relay with a drop screw that may have a bad connection. i cleaned it and still get the "no bus" message.
anybody have any ideas? Thanks.
i called a friend and he said that in the fusebox inside the engine compartment there is a big relay with a drop screw that may have a bad connection. i cleaned it and still get the "no bus" message.
anybody have any ideas? Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
Oct 11, 2007 04:20 PM
engmike
3rd Gen Engine and Drivetrain -> 2003-2007
1
Jun 17, 2006 07:10 PM



