HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

New Contacts Still just Clicking

Thread Tools
 
Search this Thread
 
Old Jan 1, 2006 | 05:30 PM
  #1  
Txwelder's Avatar
Thread Starter
Registered User
20 Year Member
 
Joined: Jan 2004
Posts: 1,677
Likes: 1
From: Texas
New Contacts Still just Clicking

Replaced the contacts in my starter. Worked great for about two days. Went out this morning and all I got was clicks. Had to turn the key six or seven times before it finally kicked over. What is bad here?
Reply
Old Jan 1, 2006 | 05:49 PM
  #2  
redhauler's Avatar
Registered User
 
Joined: Dec 2004
Posts: 76
Likes: 0
From: Weatherford Texas
I a m going to guess you have already checked the starter amp draw?
to see how many amps it is pulling, you might just need a whole new starter
too many amps will burn up things,get by a auto parts store and let them try a amp test <If you can> or if you have your own Meter.
Reply
Old Jan 1, 2006 | 05:57 PM
  #3  
Txwelder's Avatar
Thread Starter
Registered User
20 Year Member
 
Joined: Jan 2004
Posts: 1,677
Likes: 1
From: Texas
I do have a meter but not sure how to to check the starter properly. What should it be?
Reply
Old Jan 1, 2006 | 07:33 PM
  #4  
Racer9's Avatar
Registered User
 
Joined: Dec 2005
Posts: 431
Likes: 0
From: Erie Pa
Under the hood, behind the battery, is the electrical box, where the starter relay is. Try switching it with one of the other relays there.
Reply
Old Jan 1, 2006 | 07:51 PM
  #5  
kd460's Avatar
Registered User
 
Joined: May 2003
Posts: 953
Likes: 0
From: Southeastern Michigan
Yep, switch it with the horn relay, on mine it was the same amps, did the trick for me!
Reply
Old Jan 1, 2006 | 08:00 PM
  #6  
ctd89-99's Avatar
Registered User
 
Joined: Sep 2003
Posts: 231
Likes: 0
From: Gibsonia,Pa. 20 miles north Pittsburgh
starter

Maybe your starter needs brushes??
Reply
Old Jan 2, 2006 | 12:37 PM
  #7  
Txwelder's Avatar
Thread Starter
Registered User
20 Year Member
 
Joined: Jan 2004
Posts: 1,677
Likes: 1
From: Texas
Thanks for the relay tip. Will give it a shot.
Reply
Old Jan 4, 2006 | 08:59 PM
  #8  
Vulcan's Avatar
Registered User
 
Joined: Dec 2004
Posts: 138
Likes: 0
From: Vancouver, USA
Did you replace the plunger too?
Reply
Old Jan 4, 2006 | 09:32 PM
  #9  
74dart's Avatar
Registered User
 
Joined: Jan 2006
Posts: 583
Likes: 0
From: Shelby NC
Same problem

I was haveing the same problem about 3 months ago. Was at the beach with the 5th wheel and was afraid I would not make it home. To make a long story short I had to replace the starter.






96 2500 4x4 club cab auto trans. New fuel plate. 35lbs boost. Nice black smoke at wot.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Common
12 Valve Engine and Drivetrain
1
Jul 30, 2010 11:58 PM
alltimelow1
3rd Gen Engine and Drivetrain -> 2003-2007
7
Mar 29, 2010 07:26 AM
buckman361
24 Valve Engine and Drivetrain
8
Nov 13, 2008 09:54 AM
Sleigher
12 Valve Engine and Drivetrain
10
Mar 31, 2008 04:59 PM
Sleigher
HELP!
16
May 4, 2007 07:16 PM




All times are GMT -5. The time now is 06:46 PM.