I just started installing a new set of injectors in my 02 HO Ram. Well you are supposed to loosen one of the bolts in the hold-down clamp and leave the other one alone. Well guess what, I loosened the wrong one. Does anyone know what to torque the two shouldered bolt to?

 

This is one for which I recommend you check with Cummins, just to be safe.<br><br>I tighten them snug plus 1/8 of a turn with a hand nut driver, with clean threads and blue loctite, but that is from years of experience. I do not recall ever using a torque wrench, and I cannot find a torque value in my documentation for those little critters.