Fuel heater position
Thread Starter
DTR's Night Watchman & Poet Laureate
Joined: Jun 2004
Posts: 2,156
Likes: 1
From: Lyndon KS
Fuel heater position
The fuel heater came off with the fuel filter.
There is one side that has a metal face and teh other side is plastic............
Which side goes to the filter and which to the block?
There is one side that has a metal face and teh other side is plastic............
Which side goes to the filter and which to the block?
Thread Starter
DTR's Night Watchman & Poet Laureate
Joined: Jun 2004
Posts: 2,156
Likes: 1
From: Lyndon KS
Got It........
Re: Fuel Heater
--------------------------------------------------------------------------------
Quote:
Originally Posted by Chrisreyn
Quote:
Originally Posted by Underpsi
Quote:
Originally Posted by Chrisreyn
Well Mine fell off about when I removed teh fuel filter, can you tell me on yours, is the metal face towards the filter?
do you mean the metal face part of the heater? when yours fell off the threaded stud thing that the filter screws onto came off with the filter right?
The threaded stud came off with teh filter and I didnt see how it went on....
one end of the stud is slotted, I am sure that goes to the filter, but I dont know which face of the heater goes to the filter
the metal face goes to the filter on the heater. and the slotted end also goes to the filter i just can figure how to get it off without wrecking the threads
--------------------------------------------------------------------------------
Quote:
Originally Posted by Chrisreyn
Quote:
Originally Posted by Underpsi
Quote:
Originally Posted by Chrisreyn
Well Mine fell off about when I removed teh fuel filter, can you tell me on yours, is the metal face towards the filter?
do you mean the metal face part of the heater? when yours fell off the threaded stud thing that the filter screws onto came off with the filter right?
The threaded stud came off with teh filter and I didnt see how it went on....
one end of the stud is slotted, I am sure that goes to the filter, but I dont know which face of the heater goes to the filter
the metal face goes to the filter on the heater. and the slotted end also goes to the filter i just can figure how to get it off without wrecking the threads
Thread
Thread Starter
Forum
Replies
Last Post
bob95065
12 Valve Engine and Drivetrain
21
Aug 21, 2007 05:16 PM
halerazor
Performance and Accessories 2nd gen only
5
May 4, 2004 09:55 AM



