Oh, I know.
On that 6" XX heavy pipe. It was 30lbs. of 1/8" 7018 to fill her up.
All the pipe Im welding out at the refinery has all got to be heli-arced (tig).
My wrist hurts.

 

Well good luck man keep on burnin wire im gona try tofind a trackbar in the mornin.

 

Nice talking to you.

 

Checked the trackbar today tight, we could not find anything loose in the front end, anymore ideas?

 

Have the wheels been balanced or rotated lately?Maybe one of the wheel weights fell off.
It could be anything in the driveline.
I cant think of anything else without looking at it.
You can jack up the front and shake the tires up and down and side to side. That will tell you if anything is loose.

 

Jacked it up and shook it nothing loose anywere, had the tires balanced yesterday mornin, u joints are good, by the way pulled today at the county fair 8000 lbs class 325.9 feet 1st place.

 

Id say drive it, go on your vacation.
You should start a new thread in the 2nd gen section. It will get alot more responses.
Great job on the pull!!!

 

i have an 03 and it had a bad wobble in the front end i bought the truck new with a 6" lift they put a new one onit because it was so bad when it was said and done we me and the dealer put about 10000 grand trying to figure it out it was the the aliagnment they need to put the camber hard toward the back of the truck and then squrare it from there it may sound dum but it works every time on mine hope this can help its a pain when truck feels like its going to shake a part

 

I had messaged you about the your front end through my buddys account now iam a member he said you were trying to get a hold of me maybe i can help