DSS/PSC Brace Help
Thread Starter
Registered User
Joined: Sep 2005
Posts: 558
Likes: 0
From: NC
DSS/PSC Brace Help
Got my Dodge Steering Stablizer from PSC today and there aren't any instructions in the box, so thats just great. I know its pretty self explanitory but anybody got some instructions or a link to any.
Thanks for the help im going to put it on tommorow.
Thanks for the help im going to put it on tommorow.
DTR's Cow Boss
Joined: Sep 2003
Posts: 1,507
Likes: 2
From: Dufur Or
Registered User
Joined: Jan 2008
Posts: 300
Likes: 1
From: Ahwahnee, Ca
Good for you "DodgeCowboy". I used those instruction to. My bearing assembly was a little different so the step showing tightening with a hit of the punch did not apply. They had changed the design of the bearing. I just had 2 allen bolts to tighten against the pitman nut. Here is a TDR thread I started on my DSS install trouble:
http://www.turbodieselregister.com/f...s-trouble.html
Here is an exceprt from that thread with pic's showing what I mean:
http://www.turbodieselregister.com/f...s-trouble.html
Here is an exceprt from that thread with pic's showing what I mean:
I'm ready to install the DSS but I don't see a locking ring thats mentioned in the instructions. Am I missing something? The pics show 2 set screws with allen wrenchs hanging out for reference. Were would the locking rick go?
I'm ready to do this now but can't till I figure this out.
I'm ready to do this now but can't till I figure this out.
Thread
Thread Starter
Forum
Replies
Last Post
03CTDCO
3rd Generation Ram - Non Drivetrain - All Years
11
May 20, 2009 06:36 AM
CTD2001
Performance and Accessories 2nd gen only
22
Jul 27, 2008 07:55 PM
D45
3rd Generation Ram - Non Drivetrain - All Years
30
Apr 17, 2008 07:24 PM
Chazmanian
3rd Generation Ram - Non Drivetrain - All Years
25
Apr 8, 2008 08:57 AM